MIHEL Ceramic Oil® 9120 5W20

MIHEL Ceramic Oil® 9120 5W-20 is a premium fully synthetic engine oil enriched with nano-ceramic components that significantly enhance its physical and chemical properties. Using advanced PAO (polyalphaolefin) technology, this oil delivers superior stability, durability, and performance compared to traditional formulations.

Developed specifically for modern Ford EcoBoost engines, it also meets the requirements of Jaguar and Land Rover vehicles. The advanced formulation ensures outstanding fuel economy, minimises the risk of LSPI (Low-Speed Pre-Ignition), and provides a stable oil film even under extreme heat and heavy loads.

Key Benefits

• Fuel-saving performance – designed to reduce fuel consumption in modern petrol and diesel engines
• Nano-ceramic protection – smooths engine friction surfaces, reducing wear and improving efficiency
• Cold-start reliability – rapid lubrication in low temperatures
• Exceptional thermal stability – highly resistant to oxidation, shear, and oil breakdown under extreme stress
• LSPI protection – minimises the risk of pre-ignition in turbocharged direct injection engines
• Reliable protection – consistent performance throughout the manufacturer’s recommended service period
• PAO-based formulation – ensures premium stability, durability, and extended oil film strength

Industry Standards & Approvals

• ACEA C5
• API SN, SN RC
• ILSAC GF-5
• STJLR.03.5004
• WSS M2C948 A / WSS M2C948 B
• WSS M2C925 A / WSS M2C952 B

Applications

• Ford EcoBoost engines
• Jaguar and Land Rover petrol and diesel vehicles requiring ACEA C5 oils
• Turbocharged petrol engines with direct fuel injection (GDI)
• Modern engines requiring approvals: WSS M2C948 A/B, WSS M2C925 A, WSS M2C952 B

Packaging & Storage

Available in 1L, 5L containers.
Store in a dry, covered location, away from direct sunlight and high temperatures. If stored outdoors, keep containers upright and protected from rain.

Technical Profile

• Density at 20°C: 0.842 g/cm³
• Viscosity at 100°C: 8.6 cSt
• Viscosity at 40°C: 47.8 cSt
• Viscosity Index: 160
• CCS Viscosity @ -30°C: 3620 cP
• T.B.N. (Total Base Number): 8.0 mg KOH/g
• Sulphated Ash: 0.8%
• Zinc: 0.10%
• Calcium: 0.18%
• Phosphorus: 0.08%
• Colour: Brown
• Flash Point: 237°C
• Pour Point: -59°C
• Noack Volatility: 8.2% M/M
• Dynamic Viscosity (HTHS): 2.91 mPa·s
• Low-Temperature Pumpability (MRV) at -35°C: 9,650 mPa·s