MIHEL EP500 PEM MOTO SPORT – High-Performance Ceramic Additive for Petrol Engines

MIHEL EP500 PEM MOTO SPORT is a highly effective additive designed to protect and revitalise highly stressed petrol engines operating under extreme conditions and elevated temperatures. It provides advanced protection for performance engines used in motorsport or demanding driving environments.

The innovative formula, based on intelligent nano-particles with exceptional surface activity, creates a durable and stable ceramic–metal protective layer on metal surfaces. This layer exhibits extremely low friction coefficients and excellent thermal conductivity, significantly reducing mechanical resistance while maintaining constant protection of engine components. The result is smoother performance, lower wear, and a noticeable improvement in mechanical efficiency.

Regular use of MIHEL EP500 PEM MOTO SPORT helps extend engine life, maintaining reliability and performance even under high thermal and mechanical stress. The additive offers long-lasting protection for up to 38,000 miles (60,000 km).

Formulated with serpentinite, a naturally occurring mineral with surface-revitalising properties, it actively restores and strengthens metal surfaces, contributing to smoother operation and enhanced durability of key engine parts.

Why Use MIHEL EP500 Additives?

• Regenerates and protects the engine and its mechanisms from wear and tear
• Creates a durable protective layer with ultra-low friction and high thermal resistance
• Improves compression pressure in cylinders for better efficiency
• Delivers fast results – noticeable effect after only 5 engine hours or around 310 miles
• Reduces oil consumption and stabilises engine performance
• Smooths and quietens engine operation
• Minimises the risk of mechanical failure
• Lowers fuel consumption under all driving conditions
• Enhances power, torque, and engine dynamics

Application Steps

Step 1
Follow the dosage chart printed on the back of the product. Always determine the correct amount based on engine mileage and oil capacity. If applying in stages, repeat the process every 650 miles (1,000 km). Do not exceed the recommended dosage.

Step 2
Add the calculated amount of additive directly into the engine oil filler neck. Ensure the engine oil has reached its normal operating temperature before application.

Step 3
After adding the product, replace the filler cap and run the engine for 30 minutes. Once complete, the vehicle can be driven normally.

Step 4
If applying in multiple stages, repeat each application after every 650 miles (1,000 km).

Step 5
Full engine protection is achieved 650 miles (1,000 km) after the final application.

Dosage Guidelines

Oil Capacity: 2–5 Litres

• Up to 125,000 miles: 0.5 dose × 2
• 125,000–250,000 miles: 1 dose × 2
• Over 250,000 miles: 1 dose × 3

Oil Capacity: 5–12 Litres

• Up to 125,000 miles: 1 dose × 2
• 125,000–250,000 miles: 1 dose × 3
• Over 250,000 miles: 1 dose × 4